LED ceiling light "Lille", remote control
-
Code:8801
-
Pre-order
Voltage:AC220V
Power:52W ; 60W
Color temperature:3000-6000K
Remote control:Yes
Dimming:Yes - with remote control
Material:Acrylic
Warranty:2 years
Dimensions | Illuminated area |
420x420x44mm | up to 10 sq.m |
520x520x44mm | up to 16 sq.m |
Quick Buy
Just 2 fields to fill in







LED lighting fixture "Lille", from the series of designer lighting fixtures offered by Dianid, is a stylish lighting fixture suitable for ceiling installation.
Through the remote control, you can adjust the color temperature to your liking from warm to cold white. This is possible because the inner and outer parts of the luminaire can glow with different color temperatures independently of each other.
Remote control functions:
![]() |
- include |
![]() |
- op |
![]() |
- quick switching between two intensities of daylight - strong and weak |
![]() |
- quick switch between pre-stored color temperatures - warm, daylight, cool white |
![]() |
- smoothly decrease the brightness by holding the button |
![]() |
- smoothly increase the brightness by holding the button |
![]() |
- changes the color temperature of the outer part of the body to warm and the inner to cold light |
![]() |
- changes the color temperature of the outside of the body to cold and the inside to warm light |
![]() |
- quick switch to low, warm light mode |
Used as the only lighting, at its maximum power, we recommend the body for rooms with a square footage of 10-12 square meters (for size 420x420x44mm).
Please note the following: when turning off the light fixture from the remote control, the color temperature and brightness settings will be saved, and the next time you turn it on (from the remote control), the light fixture will have the same settings , with which you turned it off. If you turn off the light fixture via the wall switch (or turn off power to it in any other way), the light settings will not be saved.
The kit does not include batteries for the remote control.
The light fixture is packed in a cardboard box and sealed with styrofoam. In the box, the light fixture is wrapped with protective film and paper for additional protection from scratches during shipping. IMPORTANT! When removing the protective film and paper, do not use sharp objects or abrasive preparations and materials. The protective film and paper must be removed carefully and patiently by hand. It is recommended not to use other means, as they can easily scratch the light fixture. Scratched lighting fixtures are not replaced!
If you don't think you can handle the removal of the protective film yourself, we can do it for you completely free of charge. In this case, you need to get the light fixture from our store in person.
LED illuminators CANNOT be combined with any other illuminators except LED in the same lighting circuit!
Combining them with other types of lighting can cause the LEDs to burn out, which is NOT COVERED by the warranty!