LED ceiling light Besançon, remote control

Remote control functions:

	- on
	- off
	- fast switch full power, low power
	- fast switch color light - warm, day, cool white
	- smoothly reducing (down) the power of light
	- gradually increasing the light intensity
	- changes the color temperature of the outside of the body to warm and the internal to cold light
	- changes the color temperature of the outside of the body to cold and the internal to warm light
	- quickly switching to a regime with a weak, warm light

Used as special lighting, with maximum power, we recommend the body for a room with a square footage of 8 square meters (for size 580x380x44 mm) to 18-20 square meters (for size 1000x650x60 mm).

Please note the following: when turning off the light fixture from the remote control, the color temperature and power settings of the light control will be saved, and the next time you turn it on (from the remote control), the light fixture will have the same settings , with which you turned it off. If you turn off the light fixture via the wall switch (or turn off power to it in any other way), the light settings will not be saved.

Remote control batteries are not included.

The light fixture is packed in a cardboard box and sealed with styrofoam. In the box, the light unit is covered with protective film and paper for additional protection against growth during transport. IMPORTANT! When removing the protective film and paper, do not use sharp objects or abrasive preparations and materials. The protective film and paper must be removed carefully and patiently by hand. It is recommended not to use other means, as they can easily scratch the light fixture. Scratched lighting fixtures are not replaced!

If you don't think you can handle the removal of the protective film yourself, we can do it for you completely free of charge. In this case, you need to get the light fixture from our store in person.

Download the instruction manual for working with lighting fixtures from the Designer lighting fixtures series with remote control

LED illuminators CANNOT be combined with other illuminators, except LED, in the same lighting circuit!
Combining them with other types of lights can cause the LEDs to burn out, which is NOT COVERED by the warranty!